Products

Base station receiver: 940R

Specifications

• Receiving frequency: 2.3MHz & 2.8MHz
• Modulation: FM wide-band
• IR frequency response: 50Hz to 10kHz (system)
• Speakers: 8 ohm
• Auxiliary input level: 200 mVrms
• Auxiliary input impedance: 15k Ohm, Nominal
• Signal-to-noise: >65dB (system)
• THD: <1% @ 1kHz into 8 Ohm
• Nominal deviation: ± 10 kHz
• Maximum deviation: ± 25 kHz
• Squelch: RF carrier/tone control
• Squelch level: 19 dBuV
• Power supply: 15VAC at 2.5A
• User controls: Power on; Channel A volume; Channel B volume; 2 auxiliary volumes; OPTIVOICET™; Hi-band EQ (left side)
• Displays: Power on/off LED; Ch A & Ch B signal LEDs
• Color: Black case, silver front face
• Size (wxdxh): 21.5 x 23.5 x 2.25cm
• Weight: 1.3kg
• Case: Steel, baked enamel finish, solid aluminum front face
• Operating range: 18.5m line-of-sight (typical)*
  (*Based on average room surfaces and layout)
• Reception area: 232m2 (typical, with ceiling sensor)*
  (*Based on average room surfaces and layout)
• Reception angles: 130° horizontally; 60° vertically (1/2 power)
• Inputs/outputs: 2 RCA stereo (L/R) aux in jacks; RCA aux out jack; 4 quick-connect speaker terminals; 3 RCA jacks for external sensor connection; 2.5mm input power jack; 1.3mm output charge jack

Product specifications may change without prior notice.
Product supply is subject to availability.